Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Silver Lake
Roof repair in Silver Lake usually means working on a hillside lot with tight access, a pre-war or mid-century roof that’s been patched a few times before, and drainage that doesn’t behave the way flatland roofs do. We know those conditions well. Our crews stage carefully on narrow streets, work within Silver Lake’s hillside overlay rules, and fix the actual leak source rather than chasing symptoms. If you’re in 90026 and you’ve spotted water stains, lifted shingles, or ponding on a flat section, call us at (866) 705-2978 for a free estimate. Ron Thibodeau leads our Roof Repair team, and he’ll walk you through exactly what’s wrong before any work is quoted.
Key Takeaways
- Silver Lake roof repair typically runs $450 – $1,400 for targeted fixes; full flat-roof patches with new scuppers range $1,800 – $4,500.
- Most Silver Lake leaks trace back to flat-roof ponding and blocked scuppers, not missing shingles.
- Hillside overlay zoning in 90026 affects staging, materials, and permits on many lots.
- We work with seven manufacturer lines, so material matching on mixed roofs is rarely a problem.
Why Marquis Roof Repair Is Silver Lake’s Preferred Roof Repair Company
Silver Lake homeowners tend to be specific about what they want. The housing stock here spans 1920s Spanish Colonials on the flats, mid-century moderns cantilevered over slopes, and contemporary infill squeezed between older bungalows. That mix demands a roofer who doesn’t arrive with one answer for every house.
Our repair-first approach means we investigate before we recommend. On a Silver Lake roof that’s already been patched two or three times, the real issue is often a failed scupper or a low-side parapet flashing, not the shingle field. Homeowners call us because they’re skeptical of being sold a replacement they don’t need. We give them a diagnosis they can verify.
We carry materials from seven manufacturers including GAF, CertainTeed, and Tamko. That matters in Silver Lake because so many houses have mixed roof types: original clay tile over one section, tar-and-gravel over an addition, composition shingle over a dormer. A roofer locked into one brand has to make compromises. We don’t.
Since Burbank is our base, we reach Silver Lake quickly. Not in a “we’ll be there someday” way. Scheduling is real, and our crews know Hyperion Avenue, Rowena, and the roads winding up from Sunset as well as the flatter streets near the reservoir. That local familiarity cuts down on surprises once we’re on site.
Styles & brands we work with






Storm Damage Roof Repair in Silver Lake
Storm Damage Roof Repair in Silver Lake usually comes down to three things: wind-driven rain finding its way under old flashing, debris clogging scuppers and drains during heavy downpours, and the long dry spell between storms hiding damage that should have been caught in October. When the first atmospheric river hits in November or December, roofs that were fine in August suddenly show leaks.
A typical Silver Lake storm repair runs $450 – $1,200 for flashed areas around chimneys, skylights, or vent boots. If the storm tore a section of membrane or opened a seam on a flat roof, expect $1,200 – $2,800. If water got into the sheathing and decking is soft, the scope grows from there. We always give a line-item quote before work starts, so you’re not guessing while the tarp is up.
One thing we see on Silver Lake hillside roofs after storms: uphill neighbors’ drainage dumps onto the low side of your roof, and that extra water overwhelms an aging scupper. The shingles look fine. The leak is at the party wall flashing. That’s the repair we look for first.
Wind Lifted Shingles and Flashing
Wind exposure on Silver Lake hillside streets like Micheltorena and Landa is real. When shingles lift at the rake edge or flashing peels back at a chimney, water follows within hours. We resecure or replace the damaged material, check the underlayment for tears, and make sure the repair line matches the surrounding roof.
Scupper and Drain Failures During Heavy Rain
On flat and low-slope roofs, a single blocked scupper can pond water until it backs up under the membrane. We clear the blockage, rebuild the scupper flashing, and add ice and water shield at the low edge where the water exits. That’s often the difference between a small storm repair and a ceiling replacement.
Metal Roof Repair in Silver Lake
Metal Roof Repair in Silver Lake isn’t something the average roofer here handles every week, but we do. Many Silver Lake homes have metal accents: standing seam over a carport, corrugated metal on a shed or workshop, or a metal roof on a mid-century addition. When those panels leak, the fix is usually at the seams, fasteners, or transitions where metal meets the original roof.
Repair costs on Silver Lake metal roofs generally run $500 – $1,500 for seam or fastener fixes, and $1,500 – $3,000 when a panel section or a flashing transition needs replacement. If the metal roof is older and the substrate beneath it has rusted, we’ll tell you honestly whether a patch buys time or whether the metal has reached the end of its useful life.
Our multi-brand access matters here too. We work with Tamko, Boral, and CertainTeed metal and metal-compatible underlayment products. Whatever your existing panel profile is, we can usually match it or come close enough that the repair won’t announce itself from the street.
Seam and Fastener Leaks
Metal roofs in Silver Lake deal with serious sun. Expansion and contraction over years loosens fasteners and breaks seam sealant. We re-tighten, re-seal, and replace rubber washers where needed. If the panel itself has corroded through, we’ll cut out the bad section and patch it properly with matching gauge metal.
Transition Flashing Failures
Where a metal roof meets comp shingle or a stucco wall, the transition is where water gets in. We rebuild those intersections with proper counterflashing and sealant, so the joint sheds water instead of channeling it. On hillside homes with multi-level additions, these transitions are often the whole problem.
Trusted Brands We Service in Silver Lake
We’re authorized to install and repair roofs from seven major manufacturers: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. That breadth means we don’t steer a Silver Lake homeowner toward whichever product happens to be in our yard. We recommend the right material for your roof, your exposure, and your budget. For a 1920s Spanish Colonial in Silver Lake, that might mean matching clay tile from Boral. For a 1960s flat-roof addition, CertainTeed’s low-slope systems make sense. Because we stock parts for all of these lines, repair turnaround on mid-project material runs is quick, and we don’t leave your roof open waiting on a special order.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Repair Problems We See in Silver Lake Homes
- Ponding on flat and low-slope roofs. Silver Lake’s dry summers bake tar-and-gravel roofs until they shrink and crack. When winter storms arrive, water ponds at the low edges, and the scupper or drain that should release it is clogged or rusted shut. The membrane gets overwhelmed, and you see a leak on the interior wall below.
- Cross-lot drainage from uphill neighbors. In 90026, many lots pitch steeply, and the uphill neighbor’s roof or yard drains directly toward your low-side wall. That constant moisture degrades flashing, stucco, and fascia where the lots meet, even when your own roof is in decent shape.
- Soft original wood sheathing. Homes built in the 1920s and 1930s still have their original plank or plywood decking in many cases. After decades of dry heat and a few winter leak cycles, that wood softens. A repair that starts as a shingle patch often turns into a decking replacement once we get the layers off.
- Mixed roof types on additions. Silver Lake houses are rarely one roof. The main house might be clay tile, the addition is tar-and-gravel, and the carport is metal. Each material ages differently, and the seams between them fail first. We inspect those transitions carefully during any repair estimate.
Pricing for Roof Repair in Silver Lake, CA
Roof repair pricing in Silver Lake reflects the area’s hillside lots and older housing stock. Here’s what homeowners in 90026 typically pay:
- Vent boot replacement: $250 – $450
- Flashing repair around chimney or skylight: $450 – $1,000
- Shingle replacement (small section): $400 – $900
- Flat roof patch with scupper rebuild: $1,800 – $4,500
- Storm damage repair (wind-driven leak): $450 – $1,200
- Metal roof seam or fastener repair: $500 – $1,500
What moves the number on a Silver Lake job is access. If we’re staging on a steep street with no flat ground, or if materials have to be hand-carried up a staircase from the road, labor hours go up. We show those costs in the quote. Call (866) 705-2978 for a free estimate, and we’ll give you a number that’s specific to your roof, not a range someone pulled from a website.
We Also Serve Cities Near Silver Lake
Marquis Roof Repair works throughout the Silver Lake area and the surrounding neighborhoods. While this page focuses on Roof Repair in Silver Lake, we also serve Echo Park, Los Angeles, Koreatown, and Hollywood. If you’re just up the hill in Echo Park or over the border into Hollywood, reach out; the same crews and the same seven-brand material access apply.
Serving Silver Lake, CA — Our Local Coverage Area
We’re based in the Silver Lake area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Silver Lake
Yes. We handle this constantly on Silver Lake’s hillside streets. When a lot has no driveway and the street is too narrow for a roll-off, we stage materials in a smaller truck, hand-carry shingles and membrane to the roof, and haul debris out the same way. We often use a city permit for a temporary lane closure on wider streets, but on tight roads like those off Micheltorena or Landa, we plan for manual access from the start. It affects labor time, which shows up in the quote, and we’ll tell you that before we begin. Call (866) 705-2978 and we’ll look at your specific street.
Yes, in most cases. When an uphill neighbor’s slope sheds water onto your low-side roof, your scuppers, flashing, and parapet wall are doing extra work they weren’t designed for. The repair usually involves rebuilding the scupper and low-edge flashing, adding ice and water shield at the transition, and sometimes installing a diverter so water exits your roof instead of sitting against the party wall. This is a known Silver Lake condition, not a mystery to solve. We’ll quote it after inspecting the drainage path. Estimates are free at (866) 705-2978.
They can. Silver Lake’s hillside zoning overlays in 90026 add review pressure for work that changes roof height, drainage, or exterior appearance. A straightforward repair like replacing damaged shingles or patching a flat section rarely triggers additional review, but anything that alters the roofline, adds a ridge vent, or changes how water sheds across a property line can. We know which questions to ask the city, and we pull permits when the job requires one. You won’t be surprised by a stop-work order because we missed an overlay rule.
We treat the neighbor’s side as part of our job site. On Silver Lake lots where houses sit close or share a wall, we give notice before we start, protect the adjacent roof and wall with plywood or tarps during staging, and keep debris off their side. If the repair touches a party wall flashing or a shared drainage path, we document the condition before we start so everyone knows what was pre-existing. It keeps the job clean and avoids disputes after the fact. It’s just how we work in dense neighborhoods like this.
Usually yes. Silver Lake homes often have two or three roof types on one house, and matching the repair to each section is easier when you work with seven manufacturer lines. We source comp shingle from GAF or CertainTeed, clay tile from Boral, and built-up roofing materials from the right manufacturer for the existing assembly. The goal is a repair that doesn’t look like a patch job. Sometimes the original material is no longer made, and we’ll tell you that honestly and show you the closest match before installing it.
If you’ve got a leak, missing shingles, or ponding water on any section of your Silver Lake roof, call (866) 705-2978 now. Ron Thibodeau and the Marquis Roof Repair team will schedule a free estimate, inspect the roof top to bottom, and give you an honest assessment with a line-item quote. From first inspection to final shingle, it’s built to the Marquis standard.
Written by Ron Thibodeau, Owner at Marquis Roof Repair, serving Silver Lake and greater Los Angeles.