Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gutter Installation Cost in Burbank?
Gutter installation in Burbank typically costs $1,400 to $3,800 for a standard single-family home, with most homeowners landing around $2,100 for 150 to 180 linear feet of seamless aluminum. Copper and covered systems run higher, from $4,500 to $9,000. Those ranges hold for most Burbank properties, though hillside homes above Glenoaks and older craftsman houses near Magnolia Park can push toward the top of the band.
We’re Marquis Roof Repair, and we install gutters across Burbank as part of the roofing work we already do every day. Below is a real breakdown of what you’ll pay here in 2026, what moves the number up or down, and how to avoid overpaying for a system that doesn’t fit your roof.
Key Takeaways
- Most Burbank gutter installations run $1,400 to $3,800 in 2026.
- Seamless aluminum is the most common choice at roughly $9 to $16 per linear foot installed.
- Burbank’s eucalyptus drop and dry-season debris load make gutter guards worth pricing at install time, not later.
- Two-story homes, steep pitches, and hillside lots add labor; ranch-style houses near Chandler Park cost less.
- Free estimates at (866) 705-2978; we measure on site so the quote is real, not a phone guess.
Gutter Installation Cost Breakdown (2026)
Here’s how a Burbank gutter job breaks down by line item. These are installed prices, meaning materials, labor, fasteners, hangers, and cleanup are included.
| Line Item | Typical Cost | Notes |
|---|---|---|
| Seamless aluminum gutter (5″) | $9 – $16 per linear foot | Most Burbank homes use 5″ K-style; 6″ runs $2 – $4 more per foot |
| Downspouts (installed) | $10 – $22 per linear foot | More needed on two-story and multi-plane roofs |
| Gutter guards / leaf screens | $7 – $20 per linear foot | Micro-mesh costs most; screens least |
| Fascia repair (if rotted) | $350 – $1,200 | Common near old trees and on pre-1960 homes |
| Old gutter removal & haul-away | $150 – $400 | More for painted steel or heavily damaged runs |
| Full replacement, 150 – 180 ft aluminum | $1,400 – $3,800 | The typical Burbank job |
| Copper system, full house | $4,500 – $9,000 | Long lifespan, strong curb appeal on period homes |
What drives the number up: linear footage, roof height, and whether we find rotted fascia once the old gutter comes off. What keeps it down: a single-story ranch footprint, easy ladder access, and reusing existing downspout locations. When we measure your Burbank home, we tell you which of these applies before you commit. That’s the home approach we take to every job.
What Affects Gutter Installation Pricing in Burbank
Burbank isn’t a generic market. The San Fernando Valley’s dry summers, the occasional heavy winter rain event, and the specific tree cover in each neighborhood all change the labor and material picture. Here are the factors that move the price most.
- Linear footage and roof geometry. A simple gable roof needs fewer feet of gutter than a home with multiple valleys and dormers. Houses off Kenneth Road and in the hills tend to have complex rooflines that add runs and downspouts.
- Stories and access. Two-story homes and steep-pitch roofs require more labor and safety setup. A single-story house near Chandler Park costs noticeably less to outfit than a two-story Spanish colonial with a tile roof.
- Tree and debris load. Burbank’s eucalyptus, palm, and ficus cover drops heavy debris. Palm fronds and ficus leaves clog standard open gutters fast, so guards pay for themselves quicker here than in most of LA County. We’ll quote guards as part of install, which is cheaper than retrofitting later.
- Fascia and roof-edge condition. If the fascia board is soft, the gutter has nothing solid to attach to. On pre-1960 homes we sometimes open up a run and find rot. Repair adds cost but it’s not optional; a gutter hung on rotted wood sags and pulls away within a season.
- Material choice. Aluminum is the value pick. Copper costs more than double but can last 50-plus years and looks right on Magnolia Park’s older architecture. Steel and zinc fall in between.
- Gutter guards and downspout routing. Micro-mesh guards add to the invoice but reduce the maintenance labor Burbank homeowners otherwise spend clearing palm and eucalyptus debris twice a year. Routing downspouts away from foundations in sloped yards can add a little labor.
How Does Gutter Work Tie Into My Roof?
Gutters are the last 5% of your roof system, but they’re the part that protects everything below. When we install gutters in Burbank, we check the roof edge, drip edge, and fascia at the same time. If shingles are lifting near the edge or the drip edge is missing, water gets behind the gutter and rots the fascia behind it. So a gutter quote from us doubles as a quick edge-of-roof inspection. If we spot something, we tell you plainly and let you decide. That’s the repair-first way we work: we investigate before we recommend anything bigger.
Marquis Roof Repair handles the full lifecycle, from inspection through repair to replacement, and we install products from seven major manufacturers: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. That matters for gutters because the product you see from the street depends on what’s happening at the roof edge, and we’re already there.
How to Save on Gutter Installation
There’s no magic discount that makes a good gutter cheap, but there are real ways to keep the project from growing. A few things we tell every Burbank homeowner:
- Combine gutter work with roof work. If you’re already getting a repair or replacement, adding gutters to the same job saves setup, disposal, and labor. A roof replacement is the cheapest moment to install new gutters, period.
- Choose aluminum unless the architecture calls for copper. Aluminum does the job for most homes at a fraction of the cost. Save copper for period homes where the look matters to resale.
- Add guards during install, not after. Guard installation at the same time as the gutter run costs less than a return visit, especially on a Burbank lot shaded by palms or eucalyptus.
- Fix fascia now, not later. A $400 fascia repair today prevents a $1,200 problem next season when the gutter pulls loose and water reaches the wall.
- Get more than one measured quote. A real quote is measured on site. Free estimates from us are free, so get one and compare line items, not just totals.
Ready for a number you can actually plan around? Call (866) 705-2978 and we’ll measure your Burbank home and quote it in writing.
Is Gutter Installation Cheaper or More Expensive Than Repair?
Repair is cheaper if the gutter run is sound. Patching a leaking joint or resecuring a sagging section might run a few hundred dollars, while a full replacement of the same run is $1,400 or more. The deciding question is whether the aluminum is failing (cracks, long splits, rust-through, repeated leaks) or just needs a fix. We look at both before we recommend either. As a business that leads with the word “Repair” in our name, we don’t push a full replacement when a targeted repair holds up.
Here in Burbank, we often see spring failures tied to palm-frond weight and winter rain hitting gutters that were pitched wrong at install. Sometimes that’s a repair. Sometimes the whole run was never hung right and needs replacing. We tell you which.
Gutter Installation in Burbank: What We Actually Need to See
Like any contractor, we only give a real number once we’ve seen the roof. When we visit your Burbank home, we measure linear footage, count downspouts, check gutter height and access, and look at fascia condition. We also look at your tree cover, because that drives guard recommendations and future maintenance. Every Burbank property we’ve done has its own mix of hillside grading, canopy, and roof pitch, and no two quotes look the same.
That’s the practical reason to get a measured estimate. A number over the phone isn’t pricing, it’s a guess. Call us and we’ll put eyes on the roof.
FAQs – Gutter Installation Cost
How much does gutter installation cost in Burbank in 2026?
Most Burbank gutter installations run $1,400 to $3,800 for a typical single-family home, with a common figure around $2,100 for 150 to 180 linear feet of seamless aluminum. Copper and fully guarded systems climb to $4,500 – $9,000. Call (866) 705-2978 for an exact quote based on your measurements.
How much do gutter guards cost on top of installation in Burbank?
Guards add $7 to $20 per linear foot, so on a 170-foot Burbank home you’re looking at roughly $1,200 to $3,400 on top of the gutter run. Micro-mesh costs the most and screens the least. We recommend guards on any lot with palms, ficus, or eucalyptus, since those are exactly the debris sources that fill an open gutter in Burbank.
Is it cheaper to repair or replace my gutters?
Repair, if the gutter is structurally sound. A targeted fix on a single leaking or sagging run usually costs a few hundred dollars versus $1,400-plus for a full replacement of that run. Replacing makes sense when the aluminum is cracked, rusted through, or repeatedly leaking after fixes. We assess first and tell you which, and we don’t push replacement when repair holds. Call (866) 705-2978 for a free assessment.
Can you come today for a gutter estimate in Burbank?
Often, yes. We schedule free estimates throughout Burbank and can frequently get out same-day or next-day depending on the season. Storm weeks fill up first, so if you’ve spotted a sagging gutter or a leak before the rain hits, call (866) 705-2978 now rather than waiting.
Why does my Burbank gutter cost more than my neighbor’s?
Three usual reasons: linear footage, roof height, and fascia condition. A two-story hillside home with complex rooflines and rotted fascia costs more than a single-story ranch with sound wood. Tree cover also affects guard pricing. Since every Burbank lot is different, we measure each home on site before quoting, which is the only way to give a number that holds. Call (866) 705-2978 to schedule.
Ready to Get Your Burbank Gutter Project Priced?
Gutters protect the foundation, the siding, and the landscaping below them, and in Burbank’s mix of dry summers and heavy winter rain, they earn their keep. Whether you’re adding gutters to a roof project or replacing a failing run, we’ll measure on site, quote in writing, and show you exactly what you’re paying for. That’s the Marquis standard: we investigate before we recommend, and we put craft before sales pitch.
Call (866) 705-2978 for a free estimate on gutter installation in Burbank. If you’d like to see how we handle the full scope of gutter work, our Gutter Installation in Burbank page lays out the process start to finish. Either way, one call gets you a real number.
Pricing reflects the Burbank market as of 2026. Marquis Roof Repair offers free estimates – call (866) 705-2978.
What Our Customers Say
"Flashing where the roof meets the chimney had never been done right by the original builder. He rebuilt it properly with step flashing instead of just running a bead of caulk over it like the last two people did."
— Miguel Vargas"Storm took part of the ridge off at night. They tarped it the same evening so the rain didn't get in, and did the real repair the following week."
— Ernesto Rodriguez"He told me my roof had another five or six years in it and I should not replace it yet. He was standing there with a quote pad in his hand. That's why I'll call him when it's time."
— Michelle Nguyen