Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Beverly Hills
Roof repair in Beverly Hills usually runs between $450 and $2,800 depending on what’s actually wrong once the tiles come off. Most of our Beverly Hills calls start with a ceiling stain, a missing clay tile after wind, or a flat section that’s been holding water. We’re based in Burbank, which means our Roof Repair crews reach most Beverly Hills addresses within 45 to 60 minutes for inspections, and we schedule repairs around your availability, not the other way around. If you’ve spotted water where it shouldn’t be, call us at (866) 705-2978 before the next rain finds the same path in.
Why Marquis Roof Repair Is Beverly Hills’s Preferred Roof Repair Company
The homes here ask more from a roofer than most of Los Angeles does. Clay tile, slate, flat membrane sections, valleys that collect debris from mature oaks and palms, and architectural review rules that won’t let you swap materials on a whim. Ron Thibodeau built Marquis Roof Repair around the idea that the right answer starts with knowing what the roof actually is, not what’s easiest to sell. We carry materials from seven manufacturers, including IKO, Atlas, and Boral, so when a Beverly Hills homeowner needs a low-profile tile to match a 1930s Mediterranean original, we’re not improvising.
Our repair-first approach matters in a city where a careless roofer can turn a $600 flashing fix into a $40,000 permitting disaster. We investigate before we recommend. That’s not a slogan, it’s the only way to work on homes in the Beverly Hills Flats, Trousdale, and the hillside streets above Sunset without creating problems the homeowner never asked for. When you call Marquis, you’re getting a team that has opened enough 90210 roofs to know what’s waiting underneath.
Styles & brands we work with
Storm Damage Roof Repair in Beverly Hills
Storm damage roof repair in Beverly Hills is its own discipline because the storms here are usually short, sharp, and followed by weeks of dry heat that bakes whatever the wind exposed. A winter rain event will knock loose clay tiles, lift flashing at chimneys and skylights, and drive water into flat sections that were already holding debris. The leak doesn’t announce itself until the dry season ends and the first fall rain soaks through the failed underlayment. That’s the call we get in October and November more than any other.
Storm repairs in Beverly Hills typically run from $350 for a simple tile reset to $2,200 for a valley rebuild with new underlayment and ice and water shield. The spread exists because what looks like a small tile issue often isn’t small once we’re on the roof. We document everything with photos before and after, and we write the scope in plain English so you know exactly what the storm did and what we’re fixing.
Water Intrusion at Valleys and Flashings
Valleys and flashings are the most common storm failure points on Beverly Hills tile roofs. Wind-driven rain finds the gap where flashing has lifted or where the valley metal has corroded under years of UV exposure. We replace the section, reseal the transition, and check the underlayment beneath because that’s where the real damage hides.
Wind Damage from Santa Ana Events
Santa Ana winds hit the hillside streets above Coldwater and Benedict Canyon harder than the flats. Tiles that were cracked but still seated get lifted and thrown. We do a full ridge-to-eave inspection after major wind events rather than just replacing what’s visibly missing, because a tile three feet away is often the next one to go.
Metal Roof Repair in Beverly Hills
Metal roof repair in Beverly Hills mostly involves standing-seam panels and flashing on mid-century modern homes, plus the occasional copper detail on historic estates in the flats. The metal itself can last decades, but the fasteners, seams, and transition points don’t. Expansion and contraction from Beverly Hills’ hot days and cool nights slowly works fasteners loose. A loose fastener row is a water path waiting for the next rain.
Metal roof repairs here typically land between $500 and $3,000. Small tasks like replacing a damaged panel section or re-securing a lifted seam sit at the lower end. A full re-panel of a flat metal section, including new underlayment and resealing at parapet walls, pushes toward the upper end. We work with IKO, Atlas, and Tamko metal systems, so matching an existing panel profile and finish is usually straightforward even on older homes.
Seam and Fastener Failure on Mid-Century Homes
Mid-century modern roofs across Beverly Hills use long metal runs with few breaks. That’s elegant until thermal movement breaks a seam seal. We replace the failed sealant, re-torque fasteners, and check for hidden corrosion at the panel laps so you don’t pay twice for the same leak.
Flat Metal Sections with Parapet Transitions
Flat metal sections are common on hillside builds where the roofline steps down the slope. Parapet walls trap water if the transition flashing fails. We rebuild those transitions with proper counter-flashing and a watertight membrane tie-in, and we clear any debris that’s been damming the drainage path.
Trusted Brands We Service in Beverly Hills
We install and repair roofing from seven manufacturers: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. Most roofing companies in Los Angeles carry one or two lines. That’s fine for new construction on a blank lot. It’s not fine when a Beverly Hills homeowner needs a specific clay tile profile for a 1927 Spanish Colonial or a particular low-profile shingle to satisfy an HOA’s architectural review. We stock common replacement parts for Beverly Hills and the surrounding area, which means a storm repair doesn’t wait on a special-order shipment from the manufacturer. Seven manufacturer lines, one point of contact.
Common Roof Repair Problems We See in Beverly Hills Homes
- Debris-clogged flat sections in 90210 hillside homes. Overhanging oaks and mature landscaping drop leaves onto low-slope sections, where they block drains and trap moisture. The first rain after a dry season pushes that water under the membrane, and the leak appears on a ceiling far from the actual entry point. We inspect and clear these sections each fall before the rain arrives.
- Failed skip sheathing on 1920s and 1930s estates. Original 1×6 skip sheathing was never meant to carry modern tile weight. When we lift tiles for a repair, we often find decking that’s split, rotted, or patched with plywood scraps. That’s a structural call, not a cosmetic one, and it changes the scope of the job.
- UV-degraded underlayment under clay tile. Beverly Hills gets roughly 280 sunny days a year. The tile protects the underlayment to a point, but decades of heat break down the asphalt. By the time a leak shows up, the underlayment in that section is usually gone. We replace it with modern high-heat underlayment rated for Southern California exposure.
- Flashing failures at chimneys on Spanish Colonial homes. Chimney flashing on older Beverly Hills homes was often installed with old-school techniques that don’t hold up to repeated thermal cycling. We rebuild the flashing with proper step and counter-flashing, and we inspect the mortar cap because that’s usually part of the same problem.
See the difference
Before
After
Before
After
Before
AfterPricing for Roof Repair in Beverly Hills, CA
Here’s the honest picture of what roof repair costs in Beverly Hills right now. A simple tile reset or vent boot replacement runs $350 to $700. Flashing repair around chimneys or skylights lands between $600 and $1,500. A flat-roof patch with membrane replacement typically costs $900 to $2,200. A valley rebuild with new decking, underlayment, and ice and water shield runs $1,800 to $3,500. What moves the number is what’s underneath once we open the roof. Beverly Hills homes from the 1920s and 1930s hide things. We write allowances into the contract for decking and code upgrades, and any change is priced and approved in writing before we touch it. Call (866) 705-2978 for a free estimate with exact numbers for your roof.
Key takeaways: Most Beverly Hills repairs fall between $350 and $3,500. The final number depends on what’s under the tile. We use written allowances and change orders so the price never moves without your signature. Estimates are free.
We Also Serve Cities Near Beverly Hills
Marquis Roof Repair covers Beverly Hills and the surrounding communities, including Century City, West Hollywood, Culver City, and Hollywood. Our Burbank location puts us within a short drive of every neighborhood in the 90209, 90210, 90212, and 90213 zip codes, so scheduling an inspection doesn’t mean waiting for a contractor from across the county.
Serving Beverly Hills, CA — Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Beverly Hills
Once you strip roofing off a Beverly Hills home and the city’s inspector sees what’s underneath, the permit can expand to include structural upgrades to the decking, drip edge, and any exposed knob-and-tube wiring. Homes built in the 1920s and 1930s often have 1×6 skip sheathing that fails modern code, and the city won’t let you re-cover rotted decking with a repair permit if the inspector flags it. We handle this by identifying likely code triggers during the initial inspection and writing an allowance into the contract before we start, so the first time you hear about an electrical re-route isn’t a surprise from the building department. Call (866) 705-2978 and we’ll walk you through what your specific roof is likely to trigger.
We treat hillside flat sections as leak investigations rather than patch jobs. The water entry point is rarely where the ceiling stain appears. We clear debris from drains and scuppers, run a controlled water test to isolate the membrane failure, and then replace the damaged section with new underlayment and a properly torched or adhered membrane. The key is drying out the wood decking before re-covering it, which takes an extra day but prevents the same leak from coming back. We’ve done this enough times on Coldwater Canyon and Benedict Canyon homes to know the pattern in advance.
Yes, and that’s most of what we do on Beverly Hills clay tile roofs. We re-use salvageable tiles and match the profile from our manufacturer network when a tile is cracked beyond saving. What homeowners don’t expect is what removing tiles reveals: failed underlayment, rotted skip sheathing, or broken valley metal that was hidden under the tiles. We photograph everything and give you a written scope before any additional work starts, so a two-tile replacement never becomes an unbudgeted re-deck without your approval.
A repair quote prices what we can see from the roof surface. A permit-driven allowance prices what we expect to find once the roof is opened, based on the age and construction style of the home. On a 1928 Spanish Colonial in the Beverly Hills Flats, we expect to find original skip sheathing, no ice and water shield in the valleys, and possibly exposed knob-and-tube wiring. We write those contingencies into the contract as allowances with defined unit pricing, so when the inspector requires an upgrade, the cost is already known and approved. You never pay us to re-invent the scope mid-job. Call (866) 705-2978 to have us walk your roof and identify which allowances make sense for your home.
Yes. We’re authorized to install and repair GAF, CertainTeed, and Owens Corning products, along with IKO, Atlas, Tamko, and Boral. That matters when a storm repair has to match an existing architectural shingle that’s no longer in the current production line. We pull from our multi-brand inventory and our manufacturer relationships to find the closest match for color and profile, and we document the manufacturer warranty that applies to the repaired section. Your shingle warranty and our workmanship approach can both be discussed when you call for the estimate.
Call Marquis Roof Repair for Your Beverly Hills Roof
If you’ve got a stain on a ceiling, a tile in the yard after wind, or a flat section that’s been pooling water, call (866) 705-2978. Ron Thibodeau and our crew will come out, put eyes on the actual roof, and tell you straight what it needs, what it costs, and what’s hiding underneath. Estimates are free, scopes are written in plain English, and every change order gets your signature before we start. From first inspection to final shingle, that’s how we work in Beverly Hills.
Written by Ron Thibodeau, Owner at Marquis Roof Repair, serving Beverly Hills and the greater Los Angeles area.