Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Storm Damage Repair Cost in Burbank?
Storm damage repair in Burbank typically runs $350 to $1,800 for most single-family homes, with the average landing near $900. Minor repairs like a handful of blown-off shingles or a resealed flashing run $350 to $650, while repairs that involve water intrusion into the decking, a compromised valley, or a damaged vent can reach $1,200 to $3,200. Emergency tarping to stop active leaking usually costs $250 to $600 and is often credited toward the permanent repair.
Those numbers are real for Burbank, not a national average pulled from a lead-generation site. What you actually pay depends on the roof, the storm, and how quickly water got inside. Marquis Roof Repair works with seven manufacturer lines and investigates before recommending anything, so the estimate you get reflects your roof rather than a push toward the biggest possible job.
Key Takeaways
- Most Burbank storm damage repairs fall between $350 and $1,800, with an average near $900.
- Emergency tarping runs $250 to $600 and is frequently applied to the final repair cost.
- Water that reaches the decking is the single biggest cost driver, often tripling a small repair.
- Burbank’s wind-driven winter storms and dry summer heat create specific failure patterns you won’t see in most pricing guides.
- We investigate before we recommend. Repair-first is the whole point of how Marquis works, and it’s why we don’t lead with replacement.
Storm Damage Repair Cost Breakdown (2026)
Here’s what storm damage repair costs in Burbank in 2026, broken out by the type of work. Ranges assume a typical single-family home with asphalt shingle or tile roofing. Flat and low-slope commercial-adjacent roofs run somewhat higher on average.
| Repair Type | Typical Cost Range | What It Covers |
|---|---|---|
| Emergency tarp / temporary dry-in | $250 – $600 | Stops active leaking; often credited toward permanent repair |
| Missing or blown-off shingles (few) | $350 – $650 | Replace damaged shingles, check surrounding field |
| Flashing repair (chimney, vents, walls) | $400 – $900 | Reseal or replace failed flashing at penetrations |
| Wind-damaged ridge or hip caps | $450 – $1,100 | Restore ridge and hip cap lines, re-bed and re-nail |
| Valley repair | $600 – $1,500 | Rebuild valley where debris and wind caused lifting or tearing |
| Water intrusion into decking / sheathing | $1,200 – $3,200 | Replace rotted sheathing, address underlayment, re-cover |
| Skylight or vent leak repair | $500 – $1,200 | Re-flash and reseal around skylights and vents |
| Tile repair (cracked or displaced tiles) | $600 – $1,800 | Replace broken tiles, reset field, restore underlayment |
| Storm-related partial tear-off and re-cover | $1,800 – $4,500 | Section of roof re-covered after significant wind or water damage |
Those ranges can move up or down depending on a few things. A single shingle blown off in an easy-to-reach spot is a quick job. The same missing shingle on a steep, two-story roof with hidden rot underneath is not. Water intrusion is the biggest variable: a leak that started this week and one that started last season can differ by thousands of dollars once the decking is involved. We see plenty of both in Burbank, and it’s why we open with a diagnostic inspection before anyone talks about scope or price.
What Affects Storm Damage Repair Pricing in Burbank
Six factors drive most of the cost swing on a Burbank storm damage repair. None of them are guesses. We check every one of these on the inspection and put the findings in the estimate.
- How much water got in. A shingle shingle that lifted but held is a small repair. Water that soaked into the sheathing is a bigger job, because the only correct fix is to replace the damaged material, not cover it. This is the single biggest swing factor in the range.
- Roof pitch and access. Burbank has a lot of rolling hillside homes in the hills above the valley floor, and steep roofs there take longer to work safely. Access, staging, and fall protection all add labor hours.
- Material type. Tile costs more to repair than asphalt shingle because broken tile has to be matched and the field around it reset. Boral tile and certain GAF or CertainTeed shingle lines carry their own repair considerations that affect labor and warranty.
- Age and condition of the roof. A 10-year-old roof with storm damage is usually a clean repair. A 25-year-old roof that’s already at the end of its life often fails at the point the storm hits. We report what we find and let you decide, because repair-first means the repair is one option, not the only one.
- Timing. Emergency calls on the night of a storm cost more than a scheduled repair a few days later. Tarping at 10 p.m. is a real cost. Scheduling the permanent fix during the week keeps the price down.
- Storm-damage scope. A single quadrant of roof hit by wind-driven rain is a cheaper repair than damage across multiple slopes. Burbank’s winter storms tend to concentrate damage on the windward slope, and that’s usually where we find the problem.
One more factor that doesn’t appear on most price guides: the local climate. Burbank summers push roof surface temperatures into territory that ages sealant and flashing faster than most of the country. By the time a winter storm arrives, those materials are already stressed. That’s why a small flashing failure during a February rain event sometimes presents as a larger repair by the time we get to it. We see this pattern across Burbank, from the flat rooftops near downtown to the pitched roofs in the hills.
How to Save on Storm Damage Repair
There’s no way to make storm damage cheaper after the fact, but there are several ways to keep the bill down before and after it lands.
- Call for tarping as soon as you notice a leak. A $250 to $600 tarp today often saves a $1,200 to $3,200 decking repair later. Stopping water is the cheapest repair there is.
- Get a diagnostic inspection before you agree to a scope. The inspection is how you find out whether the damage is a small repair or something bigger. We investigate before we recommend, and a free estimate for Burbank homeowners is the right first call.
- Fix flashing before the next storm. A reseal in the fall costs far less than water intrusion through the same flashing in the spring.
- Ask about matching material lines. We work with GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. Because we carry competing lines, we can often match your existing roof more closely, which can mean a smaller repair that blends in rather than a larger one that doesn’t.
- Don’t wait for the leak to reach the ceiling. A ceiling stain is a signal that the problem has already reached the decking. The earlier you call, the smaller the job.
Free estimates make the decision easier. To schedule one, call (866) 705-2978 and we’ll come out, inspect the roof, and put a real number in front of you.
What Does Storm Damage Repair Usually Include?
A storm damage repair typically includes an inspection, a moisture check, removal of the damaged material, replacement of any failed underlayment or sheathing, re-flashing, and re-covering with matching material. The repair price you’re quoted should account for all of that, not just the visible damage. A guide price is only useful if it reflects what’s actually under the shingles.
Our Storm Damage Repair in Burbank service covers the full range of what a winter storm can do to a Southern California roof, from wind-driven shingle loss to hidden water intrusion. If you’re not sure which service you need, the Marquis Roof Repair home page lays out the three core services: inspection, repair, and replacement. From first inspection to final shingle, we handle the whole lifecycle, so you never need to source a second contractor for a bigger job.
FAQs – Storm Damage Repair Cost in Burbank
How much does storm damage repair cost in Burbank in 2026?
Most storm damage repairs in Burbank cost between $350 and $1,800, with an average near $900. Larger repairs involving water intrusion or decking replacement can reach $3,200. Call (866) 705-2978 for an exact quote on your roof. Estimates are free.
Is it cheaper to repair or replace a storm-damaged roof?
Repair is almost always cheaper when the damage is isolated: a repair runs $350 to $1,800, while a full replacement starts several times higher. Replacement only makes sense when the roof is already at the end of its life. We investigate before we recommend, so you won’t be pushed toward a replacement that isn’t needed.
How much does emergency roof tarping cost in Burbank?
Emergency tarping in Burbank runs $250 to $600. In most cases, the tarp cost is credited toward the permanent repair if you have us do the follow-up work. A tarp is worth it: it’s the cheapest way to stop water before it reaches the decking and turns a small repair into a big one.
Does homeowner’s insurance cover storm damage repair in Burbank?
Storm damage repair is often covered by homeowner’s insurance when the damage is from a sudden event like wind or rain, but not from neglect or wear. A clear written estimate and photos from the inspection are what your claim needs. Call (866) 705-2978 and we’ll document the damage properly so you can file with confidence.
Can you come out the same day for a storm leak in Burbank?
For active leaks after a storm, same-day or next-morning emergency tarping is usually available. Same-day permanent repairs depend on the scope and what’s in the shop. Call (866) 705-2978 first thing and we’ll tell you honestly what we can do today, and what needs to wait for daylight and dry weather.
Why does the cost range vary so widely?
The range varies mostly because water damage spreads. A $350 repair becomes a $3,200 job when water has been soaking into the decking for a while. The good news is that the reverse is also true: getting an inspection and a tarp early usually keeps your repair close to the low end. That’s a free estimate call away at (866) 705-2978.
Why Homeowners Call Us First in Burbank
Marquis Roof Repair brings seven manufacturer lines – GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral – under one point of contact. That matters for storm damage because the right material for your roof is often the one that matches what’s already there. A roofer who carries one or two brands can’t offer you that choice, and a roofer who only sells replacement will always find a reason to replace.
We’re a roofing specialist, not a general contractor. Inspection, repair, and replacement, from first inspection to final shingle. We investigate before we recommend, and we back the work to the Marquis standard. If your roof is leaking and you need a straight answer and a real number, that’s exactly what we do.
Call (866) 705-2978 for a free estimate. We’ll inspect the roof, document what we find, and give you a real price for a real repair, with no upsell you didn’t ask for.
Pricing reflects the Burbank market as of 2026. Marquis Roof Repair offers free estimates – call (866) 705-2978.
What Our Customers Say
"Roof is solid and the price was competitive. The job ran a day over because of weather, which is nobody's fault, but I would have liked a call about it rather than noticing the crew hadn't shown up."
— Maurice Ellison"Added a ridge vent and cleared the blocked soffit vents. Attic temperature in the summer dropped noticeably and the upstairs is livable now."
— Grace Kim"Flashing where the roof meets the chimney had never been done right by the original builder. He rebuilt it properly with step flashing instead of just running a bead of caulk over it like the last two people did."
— Miguel Vargas