Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
CertainTeed Roofing in Culver City, CA | Marquis Roof Repair
We provide independent CertainTeed roofing service across Culver City’s 90230, 90231, 90232, and 90233 ZIP codes, from full tear-offs to precise shingle and membrane repairs. What makes our CertainTeed work different here is simple: we know how these roofs actually age under Culver City’s marine-layer moisture and hard UV, because we’ve torn into enough of them on Carlson Park and Sunkist Park bungalows to see exactly where they fail. Call (866) 705-2978 for a free estimate, and we’ll walk your roof with you before we recommend anything.
Why Culver City Residents Choose Us for CertainTeed Service
CertainTeed roofs dominate Culver City’s postwar housing stock, and we’ve built our repair practice around how those specific systems behave here. Ron Thibodeau grew up in Burbank’s Magnolia Park and studied building construction technology at Los Angeles Valley College before spending over two decades roofing across the San Fernando Valley. That’s the foundation, but what matters for your house is that our crews understand the exact failure patterns of Landmark, XTON, Presidential, and Flintlastic products on Culver City’s varied bungalow pitches and flat sections, experience we’ve also applied to CertainTeed repair in Century City.
We’re an independent CertainTeed service provider. We’re not authorized, sponsored, or warranty-endorsed by CertainTeed, and we tell homeowners that up front. It means our recommendations aren’t shaped by a manufacturer’s sales targets, and we stock genuine CertainTeed accessories where the system calls for them alongside aftermarket underlayment, flashing, and vents where those outperform. One point of contact, seven manufacturer lines, and no brand blinders. From first inspection to final shingle, we investigate before we recommend.
Styles & brands we work with
Common CertainTeed Roofing Problems We Solve in Culver City
- Landmark granule-stripping on south and west slopes. Culver City’s ocean breeze corridor carries intense UV that accelerates asphalt degradation on Landmark shingles, especially on 1990s – 2000s overlays. Owners see granules collecting in gutters years before they expected any wear, and sealant failures follow the same pattern. We match the existing shingle color and profile where possible, or tell you straight when a localized repair won’t hold.
- XTON and Presidential wind-lift after Santa Ana events. Dry Santa Ana winds test ridge and edge flashing hard on Culver City’s add-on second stories and denser infill near downtown. XTON and Presidential systems show creased tabs and lifted corners where flashing was under-detailed during additions, and we correct the perimeter before replacing damaged shingles.
- Flintlastic seam blistering and ponding on bungalow flat sections. Culver City’s mix of 1920s – 1950s bungalows and mid-century tract homes means a lot of flat and low-slope roofs with original or lightly patched decks. Marine-layer moisture and morning dew drive condensation under poorly ventilated low-slope membranes, and Flintlastic seams blister at scuppers where water ponds. We patch these correctly and address the ventilation issue that caused the problem.
- Hidden tar-and-gravel layers telegraphing through newer CertainTeed shingles. Culver City’s streamlined permitting has pushed a wave of remodels, and we routinely find original 1940s – 50s built-up and tar-and-gravel flat roofs buried under shingle overlays during tear-offs. Trapped moisture telegraphs through the new shingles, ruining a fresh CertainTeed system before it’s halfway through its service life.
- Overlay failures on low-slope bungalow decks. When a previous owner laid CertainTeed shingles over an aging flat roof without correcting the slope or ventilation, the shingles don’t just wear out early; they trap moisture against the original decking. We strip to deck and rebuild the system properly, rather than patching over the same mistake again.
CertainTeed Service in Culver City: What Local Conditions Mean for Your Equipment
Here’s what we see on Culver City roofs that our crews rarely encounter in CertainTeed repair in Beverly Hills or Burbank or Glendale. The collision of dense postwar bungalow tracts from the 1920s through 1950s with aggressive modern infill and second-story additions has created a distinct roofing problem: a lot of Carlson Park, Sunkist Park, and adjacent bungalows have original tar-and-gravel flat roofs still ticking along under one or two layers of CertainTeed shingle overlays. When a homeowner want to add a second story or rooftop solar, and Culver City’s permitting makes that process faster than almost anywhere else in LA County, the tear-off reveals decades of layered roofing that nobody knew was there. That changes everything about how we plan penetrations for dormers and solar mounts. You can’t land a solar rack on a buried flat roof that’s still moving, and you can’t flash a dormer cleanly against a deck with two generations of old membrane underneath. We strip to deck, correct the low-slope conditions, and build the new CertainTeed system so every penetration sits on sound layers. A roof done right the first time is the only version worth doing.
We saw this play out on a Carlson Park bungalow being prepped for a second-story addition. Our crew pulled up Landmark shingles over what turned out to be two decades of tar-and-gravel flat roof, with Flintlastic patches blistering at the seams. We stripped to deck, corrected the low-slope ventilation and flashing, then installed a fresh CertainTeed system with proper underlayment so the new dormer and solar mounts landed on sound layers.
CertainTeed Models & Products We Service in Culver City
We install, repair, and replace the full range of CertainTeed product lines found on Culver City homes and commercial low-slope stock. That includes Landmark architectural shingles, XTON architectural shingles, Presidential Shake and Presidential Shake TL luxury shingles, and CertainTeed Flintlastic and other low-slope membrane products. We use genuine CertainTeed accessories and matched shingles where the system calls for it, and quality aftermarket underlayment, flashing, and vents where they outperform, so your roof gets the right material in the right place without any single-brand loyalty driving the decision. Call (866) 705-2978 to talk through which CertainTeed line fits your Culver City roof and budget.
See the difference
Before
After
Before
After
Before
AfterCertainTeed Service Pricing in Culver City
CertainTeed roofing costs in Culver City depend on three things: the product line you choose, the condition of the deck underneath, and whether you’re repairing a section or replacing the whole system. A targeted shingle repair on a Landmark roof typically runs $350 – $850, while a full tear-off and re-roof with Landmark usually lands between $12,000 and $22,000 depending on square footage, layers to remove, and low-slope work. XTON and Presidential systems push the material cost up, and Flintlastic flat-roof patches run $800 – $2,500 depending on scope and deck condition. A hidden tar-and-gravel layer under the shingles adds tear-off labor and disposal, which is exactly why we inspect before we quote. Every estimate is free and line-itemed, so you see what you’re paying for before any work starts. Call (866) 705-2978 for an exact number on your Culver City roof.
Serving Culver City, CA — Our Local Coverage Area
We’re based in the Culver City area and know this community well, and we also handle CertainTeed repair in Ladera Heights. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CertainTeed Roofing in Culver City
My Culver City bungalow has CertainTeed Landmark shingles but a flat rear section – can you fix the flat part without redoing the whole roof?
Yes, in most cases we can isolate the flat section and repair or re-membrane it without disturbing the shingled slopes, provided the transition flashing is intact and the deck below the flat section is sound. We’ll inspect the whole roof to confirm, but many Carlson Park and Sunkist Park bungalows qualify for this targeted approach. Call (866) 705-2978 and we’ll look at the actual condition before recommending anything.
Do CertainTeed shingles hold up differently in Culver City than inland LA?
Yes. Culver City’s ocean breeze corridor brings marine-layer moisture, morning dew, and stronger UV than inland neighborhoods like Glendale or Tujunga see, and that combination stresses asphalt shingles and low-slope membranes harder than most owners expect. Landmark shingles on south- and west-facing slopes typically lose granules and sealant faster here than they would in the Valley, which is why we recommend checking those exposures at year 12 – 15 rather than waiting for a leak.
We’re adding a second story and solar to a Sunkist Park bungalow – what CertainTeed issues should we expect?
Expect the unexpected under the shingles. Many of these 1940s – 50s bungalows still carry their original tar-and-gravel flat roofs beneath one or two later CertainTeed overlays, and the tear-off will reveal it. We plan penetrations for dormers and solar mounts from the deck up, correcting the low-slope and ventilation problems before installing the new CertainTeed system so nothing telegraphs through later. Call (866) 705-2978 to schedule a pre-remodel roof inspection, it’s free.
Is CertainTeed XTON or Presidential worth it over Landmark for a Culver City home?
It depends on your slopes, your exposure to the ocean breeze corridor, and how long you plan to stay in the house. Presidential Shake offers a deeper shadow line and better wind resistance, which matters on Santa Ana-prone exposures, while XTON provides more dimensional profile at a mid-tier price. We’ll show you the actual installed cost difference on your specific Culver City roof and help you decide based on performance, not marketing.
Can you repair CertainTeed metal or tile portions along with shingle sections on the same house?
Yes. We service mixed-material roofs regularly in Culver City, where many homes combine shingle slopes with low-slope membrane sections, metal edge flashing, or leftover tile details. We use the right materials for each surface, including genuine CertainTeed shingles and accessories where the system calls for them, and aftermarket flashing and vents where they perform better. Give us a call at (866) 705-2978 and we’ll walk the whole roof with you.
Service Areas Near Culver City
Our CertainTeed service work extends from Culver City into the surrounding Westside and neighboring communities, including Burbank, Universal City, North Hollywood, Glendale, Tujunga, and Studio City. If you’re outside Culver City proper but still in the wider LA basin, we likely cover your neighborhood too. For more on our CertainTeed work in those areas, see CertainTeed service in San Marino and CertainTeed service in View Park-Windsor Hills. You can also review our broader CertainTeed sales & service page for model-line details, or check the Culver City service area page for full coverage specifics.
Book Your CertainTeed Service in Culver City Today
If your CertainTeed roof is showing its age, or if you’re planning a remodel or solar installation that touches the roof, call (866) 705-2978 today. We’ll schedule your free estimate, inspect what’s actually up there, and give you a line-item scope so you know exactly what’s needed.
Written by Ron Thibodeau, Owner at Marquis Roof Repair, serving Culver City with Roof Repair – Culver City and the surrounding Westside with independent, brand-agnostic roofing service.